7+ Bathroom Light Fittings Regulations

Bathroom lighting installed in Zone 1 must be rated as at least IP44 - this rating denotes protection against solid objects larger than 1mm and splash. All of these lights are suitable for Zone 3 - more than 600mm from shower door or bath.

Fittings in the bath.

Bathroom light fittings regulations. Follow this link for a simple breakdown of the requirements. Ad Find Quality Results Answers. Zone 1 requires IPX4.

Zone 2 requires IPX4 OR double insulated OR low voltage OR be recessed into the ceiling. Bathroom lighting regulation zones are as follows. Zone 0 is permitted but it must be designed specifically for use in a bath or shower be low voltage and have an IPX7 Ingress Protection rating.

Ad Get Info From Multiple Sources. For electrical fittings the bathroom is divided into zones into by the NZ Electrical Code of Practice as below. Bathroom lights must have higher IP ratings than lights you would use in the lounge dining room or bedrooms etc.

Zone 1 - The area immediately surrounding the bath shower to 225 m above the bath. Every light fitting has an IP rating. From small pocket sized UV LED torches through to large beam overhead UV LED arrays.

The bathroom can be split into 4 zones Zone 0 to Zone 3. Ad Find Quality Results Answers. The NZ Electrical Code of Practice published by Work Safe NZ NZ Govt has regulations covering the light fittings that can be installed in bathrooms.